$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Monessen Natural Blaze See-Through Vent Free Gas Log Set

Item #: NBST27-F

SKU:

Price range: $1,788.00 through $2,209.00

Ten hand-painted ceramic fiber logs, finished on both sides, sized for the 27" Natural Blaze See-Through burner and for no other — and every option here ships the burner with them. Pick the fuel ...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Natural Blaze See-Through Vent Free Gas Logs

Ten hand-painted ceramic fiber logs, finished on both sides, sized for the 27" Natural Blaze See-Through burner and for no other — and every option here ships the burner with them. Pick the fuel and the control under Ignition — 39,000 BTU/hr on natural gas or propane, a self-powered millivolt standing pilot with the on/off switch log, the RCB on/off remote or the TSST thermostatic remote — with no chimney and no household power, from $1,788. It needs a two-sided fireplace or vent-free firebox at least 32" wide, 19" deep and 21-1/2" high; because a see-through opens into two rooms, both faces are front faces and each one has to measure the full 32" wide. It carries a 5-year warranty on burner and logs.

Choose it if your fireplace is open on two faces — a see-through masonry or factory-built fireplace, or Monessen's Lo-Rider See-Through vent-free firebox — and you want a log stack that looks right from both rooms rather than a single-sided set turned sideways. The opening needs 32" of width, 19" of depth and 21-1/2" of height, 42" to the ceiling and 9" to a sidewall — and since a see-through has a front on each side, Monessen's firebox table asks for the 32" of width at both faces, not just the one you measure from. Pick the burner with the switch log, an on/off remote or a thermostatic remote; every choice includes the burner.

It is not right for a single-sided fireplace — the stack is built and placed for an opening finished on two faces. It is not a primary heat source, it cannot go in a bedroom or bathroom, and a fireplace shallower than 19", a glass-door frame taller than 3" in front of the logs, less than 42" to the ceiling or 9" to a sidewall, or doors that will be closed while it runs all rule it out. The logs fit the Natural Blaze See-Through burner only — they are not a replacement set for any other burner.

Specifications

Minimum fireplace size with the burner and logs is 32" wide, 19" deep and 21-1/2" high, and because a see-through is open on two sides Monessen's minimum-firebox table prints the same 32" for the rear width as for the front — both faces are fronts, so both must clear 32". A glass-door frame up to 3" tall in front of the logs raises the depth to 24"; anything taller is not recommended. Sidewalls stay 9" from the opening, the ceiling 42" above it, and the facing above the opening must be non-combustible — 12" or more of it, or 8" to 12" with the optional adjustable hood. A combustible mantel needs 14" of clearance at 3" deep up to 23" at 12" deep (8" to 17" with the hood). Combustible flooring other than carpet or vinyl may run to the opening; carpet or vinyl stays 14" back. The burner draws 39,000 BTU/hr on either gas — 26,000 minimum on natural gas, 30,000 on propane — on standard gas pressures, 5" to 10" w.c. inlet for natural gas and 11" to 13" for propane, with no 120 V connection.

Features

  • Ten hand-painted ceramic fiber logs finished on both sides — a stack that reads as a real fire from either room of a see-through fireplace
  • Natural Blaze burner technology — instant, dancing yellow flames with a glowing ember bed across the front of the burner
  • 39,000 BTU/hr on natural gas or propane — the Natural Blaze See-Through millivolt burner comes with the logs on every option here
  • No electricity needed — the millivolt valve is self-powered and lights with a piezo igniter; the RCB on/off or TSST thermostatic remote is bundled by the Ignition choice
  • Vent free with an ODS safety pilot in a masonry fireplace, a UL127 factory-built fireplace or a listed vent-free firebox such as the Lo-Rider See-Through — and also listed for vented use with the chimney and damper open in a masonry or UL127 factory-built fireplace
  • Approved for manufactured (mobile) homes where local codes allow, with a 5-year parts warranty on the burner and logs

Answers to common questions

What’s included, what’s required, and what’s optional?
  • Included in the box: Ten Natural Blaze See-Through ceramic fiber logs, numbered 1-10, finished on both sides; Natural Blaze See-Through millivolt burner - NBST27NV-C on natural gas or NBST27PV-C on propane, included with the logs on every option here, with its grate assembly, on/off switch log, three bags of lava rock, rock wool, flex line with shutoff and two anchor screws.
  • Required to complete the installation, purchased separately: Gas supply - a 3/8" line with a listed shutoff, run and purged by a qualified installer; an external regulator on propane and on high-pressure natural gas systems; Approved see-through fireplace or vent-free firebox - a masonry fireplace, UL127 factory-built fireplace or listed vent-free firebox at least 32" wide, 19" deep and 21-1/2" high, with the 32" of width at both faces since a see-through is fronted on each side (a vent-free firebox is allowed for the vent-free mode only; a vented installation needs a masonry or UL127 factory-built fireplace).
  • Optional: The TS thermostat sensor and HILOKTN / HILOKTP variable-flame kit for the millivolt burner, the CABL adjustable hood that reduces wall and mantel clearances, the RRCM insulated receiver cover and extra VR1000A volcanic rock — a vent-free installation runs without them.
Which Ignition choice should I pick, and what does each remote do?

All three burner choices light the same millivolt standing pilot with a piezo igniter and need no electricity; they differ in how you run it. "Manual" gives you the decorative on/off switch log that ships with the burner; "On/Off Remote" adds the RCB battery remote; "Thermostatic Remote" adds the TSST touch-screen thermostat remote so the set holds a room temperature — vent-free installations only, because a thermostat is not allowed when the set is run vented. The burner itself is the same on all three, and it comes with the logs whichever you pick.

What size see-through fireplace does it need, and which Monessen firebox takes it?

The opening must be at least 32" wide, 19" deep and 21-1/2" high. A see-through faces two rooms, so treat both sides as the front — Monessen's minimum-firebox table lists a 32" rear width next to the 32" front width, and the opening has to make that 32" on each face. If a glass-door frame or a recessed hearth stands up to 3" in front of the logs, plan on 24" of depth instead; anything taller than 3" is not recommended. Monessen pairs the set with its Lo-Rider See-Through vent-free firebox (LSTF36-B), whose price-book page lists this log set as the piece that completes it; in any vent-free firebox the firebox maker's own clearances govern.

Does it need a chimney, a vent or an outside air kit?

No — the set is an unvented room heater that burns room air, so it needs no flue. Vent-free, it goes into a solid-fuel masonry fireplace, a UL127 factory-built fireplace or a listed vent-free firebox. It is also listed, in the U.S., as a vented gas log set, so if your fireplace cannot meet the vent-free wall or mantel clearances you install and run it with the chimney and damper open instead — but the vented mode is allowed only in a solid-fuel masonry or UL127 factory-built fireplace, not in a vent-free firebox, the damper stays open to the free area in the manual's tables, and a thermostat is not allowed. Either way the room must give it 50 cubic feet of volume for every 1,000 BTU/hr of gas appliances in it — 1,950 cubic feet for this burner alone.

How close can a mantel or the ceiling be?

The clearances are the same for every one on this page. The ceiling must be at least 42" above the top of the fireplace opening and sidewalls at least 9" from its sides; the wall directly above the opening must be non-combustible for at least 12" (8" to 12" is allowed with the CABL adjustable hood, less than 8" is not allowed). A combustible mantel needs 14" above the opening if it is 3" deep, 17" at 6", 20" at 9" and 23" at 12" — the hood cuts each of those by 6". If your fireplace cannot meet them, the set must be installed and run as a vented appliance with the damper open. In a Monessen vent-free firebox, the firebox's own clearances apply.

Will it work in a power outage?

Yes, on every one — nothing on this page uses house current. The burner's millivolt valve is powered by its own thermopile and the standing pilot lights from the piezo igniter, so the switch log and the battery-powered RCB or TSST remote keep running the fire when the lights are out.

Does buying from The Torch Guys affect my Monessen warranty?

No. The vent-free burner and logs carry 5 years on parts, valves, pilots and remotes 2 years, purchased accessories 1 year, and the coverage transfers to a later owner of the home. Keep your invoice and the model number from the burner's rating plate; we hold the rest on file.

Specifications

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.