$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Napoleon 30″ Linear Patioflame® Burner Kit

Item #: GPFR60

SKU: GPFR60

$719.00

60,000 BTU/hr maximum input on propane or natural gas, from a stainless steel burner pan 33-1/4" long, 11-3/4" wide and 2-3/4" deep. The Napoleon Patioflame GPFR60 is a drop-in fire pit...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Napoleon Patioflame Rectangle Burner Kit

60,000 BTU/hr maximum input on propane or natural gas, from a stainless steel burner pan 33-1/4" long, 11-3/4" wide and 2-3/4" deep. The Napoleon Patioflame GPFR60 is a drop-in fire pit burner for a non-combustible base you build. It ships ready for a 20 lb propane cylinder with its regulator and hose, includes the natural gas orifice for conversion, lights with a push-button electronic igniter, shuts its own gas off through a thermocouple safety valve if the flame goes out, and comes with a bed of topaz glass embers. It is $719, with 3 years of warranty coverage on the stainless housing and burner.

Choose the GPFR60 if you are building a long, narrow fire feature — a rectangular fire table, a ledge or a seat-height surround in stone, block or tiled cement board — and want a certified gas burner to set into it rather than a finished fire table.

It is not right for you if you want a ready-made fire table. The GPFR60 is a certified gas burner you set into a fire feature of your own design: a table, a ledge or a seat-height surround in stone, block or tile.

Specifications

The burner pan measures 33-1/4" by 11-3/4" and is 2-3/4" deep. Keep at least 24" from the burner to side walls all around, 72" from the top of the unit to a ceiling or other overhead cover, and 9" to the floor. Inlet pressure tops out at 7" w.c. on natural gas and 11" w.c. on propane. The enclosure layout, with the valve below the burner and the cylinder compartment, is drawn on pages 8 and 11 of the installation manual.

How the GPFR60 compares to the Patioflame GPFS60

The Patioflame GPFS60 is the square version of the same burner kit — the same 60,000 BTU/hr input on propane or natural gas, the same igniter, control knob and safety valve, the same warranty and topaz glass embers, in a 25-3/4" square pan instead of a 33-1/4" x 11-3/4" rectangle. The GPFR60 is $719; the GPFS60 is $719. Pick by the shape of the table or surround you are building.

Features

  • 60,000 BTU/hr maximum input on propane or natural gas, from a stainless steel burner in a 33-1/4" x 11-3/4" pan
  • Ships ready for a 20 lb propane cylinder with its regulator and hose, and includes the natural gas orifice for conversion
  • Push-button electronic igniter with a match-light backup, and a control knob that sets the flame from high to low
  • Thermocouple safety valve that shuts the gas off automatically if the flame goes out
  • Topaz glass ember bed included, with amber, clear, black, blue and red glass ember kits available
  • Drops into a non-combustible base you build, and is listed to the outdoor decorative gas appliance standard

Answers to common questions

What’s included, what’s required, and what’s optional?
  • Included in the box: Stainless steel burner pan and burner with valve, thermocouple, igniter, control panel and knob; Propane regulator and hose, and the natural gas orifice for conversion; Topaz glass embers; Napoleon President's 3 Year Limited Warranty.
  • Required to complete the installation, purchased separately: Enclosure - a non-combustible base or table for the burner to drop into, built on site with a non-combustible frame, cabinet and top; tiled cement board is the preferred surround, and the on/off valve must stay easy to reach; Gas Supply - a 20 lb propane cylinder with a QCC1 valve, or a natural gas line with its own shut-off valve run by a licensed gas fitter, who also fits the included natural gas orifice; Cylinder Compartment - if the propane cylinder sits inside the base, a vented compartment partitioned off from the burner (see pages 10 and 11 in the installation manual).
  • Optional: Glass ember kits in amber, clear, black, blue or red — the burner runs fully on the topaz glass embers it ships with.
Where can I install the GPFR60?

Outdoors only, on a patio or in the yard, in a well-ventilated spot — never inside a building, garage, screened-in porch or gazebo. A sheltered spot is best, because wind makes the flame erratic. Under a roof it can have no more than two side walls, or three if at least 30 percent of the perimeter stays permanently open. Keep 24" to side walls, 72" to a ceiling and 9" to the floor, and avoid spots with standing or running water.

Can the GPFR60 run on natural gas?

Yes. It ships set up for propane, and the natural gas orifice comes in the box. A licensed gas fitter swaps the orifice, leak tests the connections and runs the gas line, which needs a readily accessible manual shut-off valve ahead of the burner and has to be sized for 60,000 BTU/hr over the length of the run. Natural gas inlet pressure is 7.0" w.c. at most.

What can I build the base from?

Non-combustible materials only — the frame, the cabinet and the top all have to be non-combustible, and the material around the burner gets very hot, so it must be able to expand and contract without cracking. Tiled cement board is the preferred surround. Leave the on/off valve easy to reach once the burner is installed; the layout is drawn on page 8 of the installation manual.

Can the propane tank go inside the base?

Yes, one 20 lb cylinder can. The compartment needs vent openings near the top and at floor level, a partition between the cylinder and the burner, a door that does not lock, and at least 2" between its floor and the ground; sizes are on pages 10 and 11 of the installation manual. A 30 lb cylinder also works, but it sits outside the base on level ground.

How does it handle wind and rain?

Wind is the main thing to plan for — the burner shuts itself down in winds above 10 mph, so a sheltered spot works best. Turn it off when it rains, and keep it covered when it is not in use.

Does buying from The Torch Guys instead of a local store affect my Napoleon warranty?

No. Napoleon's President's 3 Year Limited Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the burner installed by a licensed, authorized technician or contractor, for normal home use. It covers the stainless steel housing and burner assembly for 3 years and all other parts for 2 years.

Specifications

Guides

No guides are available.

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.