$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Napoleon Arlington Direct Vent Gas Stove

Item #: GDS20NSB

SKU:

Price range: $3,039.00 through $3,134.00

20,000 BTU/hr input and 14,000 BTU/hr output from a cast-iron stove 19-1/4" wide, 25-3/8" high and 18-1/2" deep. The Napoleon Arlington GDS20 is a metallic black direct vent gas stove f...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Call a specialist: (540) 212-9374Free fit check before you order · we confirm venting, size and parts · Mon–Fri 9–5 ET
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.

Complete your setup

1 factory add-ons fit this model

Add any of these to your order in one click — they ship together with your unit.

Heat Management 1

Price range: $259.00 through $289.00
Options
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Napoleon Arlington GDS20 Direct Vent Gas Stove

20,000 BTU/hr input and 14,000 BTU/hr output from a cast-iron stove 19-1/4" wide, 25-3/8" high and 18-1/2" deep. The Napoleon Arlington GDS20 is a metallic black direct vent gas stove for natural gas or propane, with a PHAZER log set on a fibre burner, a porcelain reflective panel, a safety screen, millivolt or electronic ignition and a 45° top vent on 4" / 7" pipe, from $3,039, covered by Napoleon's President's Limited Lifetime Warranty.

Choose the Arlington if you want a traditional cast-iron stove for a small room: it is 19-1/4" wide and 18-1/2" deep, and it is approved for bedrooms, bathrooms, closets and recessed installations as well as, on natural gas, permanently located manufactured homes. Its 45° top exit lets the vent go out through a wall, up through the roof, or up a masonry chimney with a co-linear liner.

It is not right for you if you want a large stove for a great room. The Arlington is a compact 19-1/4" cast-iron stove, approved for bedrooms, bathrooms and even closets.

Specifications

The Arlington is 19-1/4" wide, 25-3/8" high and 18-1/2" deep. Keep 2" to a combustible back wall (5" if you add the blower), 2" in a 45° corner and 48" from the top of the stove to the ceiling; the side-wall clearance is in section 3.9 on page 24 of the installation manual. Furniture stays 48" from the front. On wood flooring it needs nothing underneath; on carpet, vinyl tile or another combustible floor it sits on a metal or wood panel the full width and depth of the stove. The vent pipe is 4" exhaust inside 7" intake, up to 20 ft horizontally or 40 ft vertically, and keeps 1" at the sides and bottom and 2" on top of horizontal runs, 1" all round on vertical runs.

How the Arlington compares to the Bayfield

Next up from the Arlington is the Bayfield GDS25, Napoleon's next direct vent stove up, in the same metallic black with the same 45° 4" / 7" venting — up to 24,500 BTU/hr against the Arlington's 20,000, with accent lights and a Proflame II remote included. The Arlington starts from $3,039; the Bayfield starts from $4,429. Pick the Arlington for the smaller room, or when you would rather choose millivolt ignition and add a remote only if you want one.

Features

  • 20,000 BTU/hr input and 14,000 BTU/hr output on natural gas or propane, from a cast-iron stove 19-1/4" wide and 18-1/2" deep
  • PHAZER ceramic-fibre log set on a fibre burner, in front of a MIRRO-FLAME porcelain reflective panel
  • Millivolt standing pilot that needs no electricity, or electronic pilot-on-demand with a seven-day continuous-pilot mode and AA battery backup
  • 45° top exit on 4" / 7" direct vent pipe — out through a wall, up through the roof, or up a masonry chimney with a co-linear liner
  • Approved for bedrooms, bathrooms, closets and recessed installations, and — on natural gas — permanently located manufactured homes
  • Ships with its safety screen, a gas flex connector with shut-off valve, and the firestop for a horizontal wall run

Answers to common questions

What venting does the Arlington need, and is it included?

The vent pipe and termination are sold separately; the stove ships with the firestop for a horizontal wall run. It vents through 4" exhaust / 7" intake coaxial direct vent pipe from a 45° top exit — out through a wall, up through the roof, or up a masonry chimney on a 3" co-linear liner — up to 20 ft horizontally or 40 ft vertically. Napoleon's GD-175 stove wall terminal kit includes its pipe, and Wolf Steel, Metal-Fab, BDM, Simpson DuraVent and Selkirk Direct Temp pipe is approved, the third-party systems each with the starter adaptor required for it. We can put the vent package together for your run.

How close can it sit to a wall, and what goes under it?

Keep 2" to a combustible back wall (5" if you add the blower), 2" in a 45° corner and 48" from the top of the stove to the ceiling; the side-wall clearance is in section 3.9 on page 24 of the installation manual. Keep furniture 48" from the front. Wood flooring needs nothing underneath; on carpet, vinyl tile or another combustible floor the stove sits on a metal or wood panel covering its full width and depth.

What’s included, what’s required, and what’s optional?
  • Included in the box: Metallic black cast-iron body with a glass door and safety screen; PHAZER ceramic-fibre log set, fibre burner and MIRRO-FLAME porcelain reflective panel; Flame/heat adjustment and the 100% SAFE GUARD gas control system; Gas flex connector with manual shut-off valve; Firestop spacer for a horizontal run through a wall; Napoleon President's Limited Lifetime Warranty.
  • Required to complete the installation, purchased separately: Venting - 4" exhaust / 7" intake direct vent pipe and a wall or roof termination sized for your run, such as Napoleon's GD-175 stove wall terminal kit, which includes its pipe (see pg 9 in the installation manual); Gas Line - a 1/2" gas supply run to the stove's flex connector and shut-off valve by a qualified installer; Floor Panel - on carpet, vinyl tile or another combustible floor other than wood, a metal or wood panel under the full width and depth of the stove; Power - a grounded electrical outlet near the stove for the electronic model's power cord; the millivolt model needs none; Securing Kit - in a manufactured (mobile) home (natural gas only) the stove must be fastened in place; the leg leveling and stove securing kit (GDSLL-KT) does that.
  • Optional: The blower kit, the remote controls, the wall mount control, the wall thermostat and, outside a mobile home, the leg leveling and securing kit — the stove runs without any of them.
Will the Arlington heat my room?

Treat it as a fire to look at, not a heater. It burns 20,000 BTU/hr and puts out up to 14,000 BTU/hr, but Napoleon certifies it as a vented decorative gas appliance rather than a heat source. If you need a stove to heat a space, it is the wrong choice.

Millivolt or electronic ignition — which should I choose?

Both give you the same fire; the difference is how the pilot runs. With millivolt ignition a standing pilot stays lit, you light it with a push-button igniter, and the stove needs no electricity. With electronic ignition the pilot lights only when the stove is turned on, with an optional continuous-pilot mode that switches itself off after about seven days unused; it has a power cord and keeps working on four AA backup batteries in a power failure.

Can it go in a bedroom or a mobile home?

Yes to both, with one limit. It is approved for bedrooms, bathrooms, bed-sitting rooms, closets and recessed installations; the mobile-home approval covers the natural gas model, for a permanently located manufactured (mobile) home fueled with natural gas, where local codes allow. In a mobile home it must be fastened in place, which the leg leveling and stove securing kit (GDSLL-KT) does. That approval covers the natural gas model only.

Does buying from The Torch Guys affect my Napoleon warranty?

No. Napoleon's President's Limited Lifetime Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the stove installed by a licensed, qualified installer; there is nothing to register, so keep your proof of purchase with the model and serial number. It covers the combustion chamber, heat exchanger, burner, logs and embers, ceramic glass (thermal breakage) and porcelain parts for as long as you own the stove, electrical and wearing parts for one year, and labour for the first year.

Specifications

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.