FRFP
Item #: GDS60-1NSB
SKU:
Price range: $4,779.00 through $4,874.00
35,000 BTU/hr input on natural gas from a cast-iron stove 27" wide, 30-1/2" high and 19-1/2" deep. The Napoleon Knightsbridge GDS60 is a metallic black direct vent gas stove for natural...
Add any of these to your order in one click — they ship together with your unit.
35,000 BTU/hr input on natural gas from a cast-iron stove 27" wide, 30-1/2" high and 19-1/2" deep. The Napoleon Knightsbridge GDS60 is a metallic black direct vent gas stove for natural gas or propane, with a seven-piece PHAZER log set behind ceramic glass and a safety barrier, electronic ignition with an AA battery backup, and a top or rear vent exit on 4" / 7" pipe, from $4,779, covered by Napoleon's President's Limited Lifetime Warranty.
Choose the Knightsbridge if you want a traditional cast-iron stove on legs that still lights in a power failure: electronic ignition with an AA battery backup, a seven-piece log set behind ceramic glass, and approval for bedrooms and bathrooms. Its vent can leave from the top or the back, so the pipe can go out through a wall, up through the roof, or up a masonry chimney on a co-linear liner.
It is not right for you if you want a modern, minimalist stove. The Knightsbridge is traditional cast iron on legs, and it still lights in a power failure.
The Knightsbridge is 27" wide, 30-1/2" high and 19-1/2" deep. Keep 6" to a combustible side wall, 6" to the back wall, 2" in a 45° corner (where the blower and on/off switches may be hard to reach), 20" from the top of the stove to the ceiling and 6" to a single-wall connector. Furniture stays 48" from the front. On wood flooring it needs nothing underneath; on carpet, vinyl tile or another combustible floor it sits on a metal or wood panel the full width and depth of the stove. The vent pipe is 4" exhaust inside 7" intake, up to 20 ft horizontally or 40 ft vertically, and keeps 2" on top and 1" at the sides and bottom of horizontal runs, 1" all round on vertical runs.
The Havelock GDS50 is the bigger Napoleon direct vent gas stove — the 2026 book rates it up to 44,000 BTU against the Knightsbridge's 35,000. The Knightsbridge starts from $4,779; the Havelock starts from $4,429. Pick the Knightsbridge for the cast-iron look.
The vent pipe and termination are sold separately; the stove comes with a firestop for the wall pass-through. It vents through 4" exhaust / 7" intake direct vent pipe from a top or rear exit — out through a wall, up through the roof, or up a masonry chimney on a 3" co-linear liner — up to 20 ft horizontally or 40 ft vertically. Napoleon's GD-175 stove wall terminal kit includes its pipe, roof kits cover 1/12 to 12/12 pitches and flat roofs, and a periscope handles a wall exit below grade. Wolf Steel, Simpson DuraVent and Selkirk Direct Temp pipe is approved, the DuraVent and Selkirk systems each through the starter adaptor specified for it, and a ceiling pass-through needs its own firestop. We can put the vent package together for your run.
Yes. The vent exit converts from top to rear, and a rear-exit install needs Napoleon's GS831K trivet, which is sold separately. If a rear exit goes straight out through the wall with no vertical run, the installer fits the smaller orifice that comes with the stove, which turns it down to 21,000 BTU/hr input.
Keep 6" to a combustible side wall, 6" to the back wall, 2" in a 45° corner and 20" from the top of the stove to the ceiling. At 2" from a wall the blower switch, on/off switch and blower cord may be hard to reach. Keep furniture 48" from the front. Wood flooring needs nothing underneath; on carpet, vinyl tile or another combustible floor the stove sits on a metal or wood panel covering its full width and depth.
Treat it as a fire to look at, not a heater. It burns up to 35,000 BTU/hr and puts out up to 27,300 BTU/hr on natural gas, and an optional blower moves warm air into the room, but Napoleon certifies it as a vented decorative gas appliance rather than a heat source. If you need a stove to heat a space, it is the wrong choice.
The fire does. The ignition normally runs on household power, and a battery holder for four AA batteries keeps it lighting when the power is out. The optional blower plugs into an outlet, so it stops until the power comes back.
It is approved for bedrooms, bathrooms and bed-sitting rooms, but not for a closet or a recessed opening. It is also approved for a permanently located manufactured (mobile) home where local codes allow; in the United States it must be vented vertically there, and it must be fastened in place with the GDSLL-KT leveling and securing kit.
Yes. With Napoleon's GS-150KT B-vent adaptor kit it becomes a natural-vent stove that vents up a B-vent or lined chimney serving no wood-burning appliance, with a spill switch that shuts the gas off if the flue is blocked. Converted, it is the GS60-1 in Napoleon's manual, which is approved for bedrooms and bed-sitting rooms and needs 1" all round the B-vent pipe.
No. Napoleon's President's Limited Lifetime Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the stove installed by a licensed, qualified installer; there is nothing to register, so keep your proof of purchase with the model and serial number. It covers the combustion chamber, heat exchanger, burner, logs and embers, ceramic glass (thermal breakage) and porcelain parts for as long as you own the stove, electrical and wearing parts such as the blower for one year, and labour for the first year.
No video is available.
Q: Do You Ship to Me?
A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.
Q: When Will My Order Ship?
A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.
Q: What Payment Methods Do You Accept?
A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.
Q: Can I Cancel or Modify My Order?
A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.
Q: Why Choose First Response Fireplace Products?
A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.
© 2026 First Response Fireplace Products, All rights reserved
Before you go
Join the list for buying guides, new arrivals and seasonal specials from an authorized dealer for every brand we carry — shipped free from the manufacturer with the full factory warranty.
Please enter a valid email address.
No spam. Unsubscribe any time.
Prefer to talk it through? Call (540) 212-9374 · Mon–Fri 9–5 ET for a free fit check.
