$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Napoleon Patioflame 25-3/4″ Square Fire Pit Burner Kit

Item #: GPFS60

SKU: GPFS60

$719.00

A 60,000 BTU/hr square gas burner for the fire pit you build yourself. The Napoleon Patioflame GPFS60 is a 25-3/4" square stainless steel burner and pan that installs into a non-combustible base,...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Napoleon Patioflame Square Fire Pit Burner Kit

A 60,000 BTU/hr square gas burner for the fire pit you build yourself. The Napoleon Patioflame GPFS60 is a 25-3/4" square stainless steel burner and pan that installs into a non-combustible base, with a topaz glass ember bed, push-button electronic ignition and a thermocouple safety valve that shuts the gas off if the flame goes out. It ships set up for propane with the regulator and hose, and the natural gas orifice is in the box. from $719.

Choose it if you are building a custom outdoor fire pit or fire table and want a square burner to drop into it, running from a 20 lb propane cylinder inside the base or from a natural gas line.

It is not right for you if you want a finished fire pit to set out and light. The GPFS60 is a certified square burner built to drop into the custom fire pit or table you design, on propane or natural gas.

Specifications

The top flange is 25-3/4" square and the pan is 2-1/2" deep, narrowing to 20" across at the bottom. Keep 24" to combustibles at the sides all around, 72" from the top of the unit to any ceiling or overhead, and 9" at the floor. Maximum inlet pressure is 7.0" w.c. on natural gas and 11.0" w.c. on propane. Enclosure framing and the propane cylinder compartment with its ventilation openings are drawn on pages 8, 10 and 11 of the installation manual. It is listed to ANSI Z21.97-2014 / CSA 2.41-2014 for outdoor decorative gas appliances.

GPFS60 vs. the Patioflame Rectangle Burner Kit

The Patioflame Rectangle Burner Kit (GPFR60) is the same 60,000 BTU/hr burner design with the same ignition, glass ember bed and warranty, in a long, narrow 33-1/4" x 11-3/4" footprint for a linear base. Pick the GPFS60 for a square pit or table and the GPFR60 for a rectangular one — from $719 vs from $719.

Features

  • 60,000 BTU/hr square burner that builds into your own non-combustible fire pit or fire table base
  • Ships set up for propane with its regulator and hose, and the natural gas orifice is in the box
  • Push-button electronic ignition, with a thermocouple safety valve that shuts the gas off if the flame goes out
  • Stainless steel burner and pan, with an insect screen on the air shutter
  • Topaz glass ember bed included; amber, clear, black, blue and red glass embers sold separately

Answers to common questions

Does it need a chimney or any venting?

No. It is an outdoor decorative gas appliance that burns in the open air, so there is no vent to run. What it needs instead is the right location: outdoors on a patio or in a yard, never inside a building, garage, screened-in porch or gazebo. Under an overhead cover it can have no more than two sidewalls, or three when at least 30% of the surrounding sides stay permanently open.

Where can I install it, and what clearances does it need?

Outdoors on a patio or in a yard, built into a non-combustible base. Keep 24" to combustibles at the sides all around, 72" from the top of the unit to any ceiling or overhead, and 9" at the floor. A sheltered spot is best, because direct wind makes the flame erratic and the burner shuts down in winds over 10 mph. Avoid places that get very wet or where water runs or collects.

What’s included, what’s required, and what’s optional?
  • Included in the box: Square stainless steel burner and pan with control panel, gas valve and flame-height knob; Push-button electronic igniter with battery, and thermocouple safety valve; Topaz glass embers; Propane regulator and hose assembly; Natural gas orifice and conversion label.
  • Required to complete the installation, purchased separately: Enclosure - a non-combustible fire pit base built on site, with tiled cement board the preferred material around the burner and clear access to the on/off valve; Gas supply - a 20 lb propane cylinder with a QCC1 valve, or a natural gas line with a manual shut-off valve, connected by a licensed gas fitter.
  • Optional: Colored glass embers (amber, clear, black, blue or red) — the burner ships with topaz glass embers and runs on them alone.
Can it run on propane or natural gas?

Both. It ships set up for propane: a 20 lb cylinder with a QCC1 valve can sit inside the base, while a 30 lb cylinder has to sit outside it on level ground. For natural gas, the orifice to convert it is in the box, and a licensed gas fitter swaps it and connects the line, which needs a manual shut-off valve and has to be sized for 60,000 BTU/hr. Input is 60,000 BTU/hr on either fuel.

How do I light it, and can I change the flame?

Press the electronic igniter, turn the knob to high and hold it in for about 30 seconds while the safety valve warms up, then set the flame height with the same knob. If the igniter battery is flat you can light it with a long match or lighter. If the flame ever goes out, the safety valve shuts the gas off on its own.

Can I use it in the rain or wind?

Turn it off when it rains. In wind it keeps burning in a light breeze but shuts down when gusts top 10 mph, which is why a sheltered location is best.

Does buying from The Torch Guys change the warranty?

Napoleon's President's 3 Year Limited Warranty covers the stainless steel housing and burner assembly for 3 years and all other parts for 2 years, with replacement parts supplied by Napoleon; labour is not covered. It applies to a home installation done by a licensed technician or contractor. Keep your invoice and the model and serial number.

Specifications

Guides

No guides are available.

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.