$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Napoleon Riverside 42″ Outdoor Gas Fireplace

Item #: RSS42NE

SKU:

Price range: $3,779.00 through $5,462.00

60,000 BTU/hr on natural gas, or on propane with Napoleon's conversion kit, across a 42-3/16" by 33-1/16" viewing area. The Napoleon Riverside 42" is a built-in, clean-face outdoor gas ...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Call a specialist: (540) 212-9374Free fit check before you order · we confirm venting, size and parts · Mon–Fri 9–5 ET
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Napoleon Riverside 42" Outdoor Gas Fireplace

60,000 BTU/hr on natural gas, or on propane with Napoleon's conversion kit, across a 42-3/16" by 33-1/16" viewing area. The Napoleon Riverside 42" is a built-in, clean-face outdoor gas fireplace for a patio or yard. It frames into an opening 49" wide, 41-1/2" high and 19-9/16" deep, takes your choice of standard oak, high definition birch or high definition split oak logs, and lights by electronic ignition from the wall switch that comes with it. It is priced from $3,779, with Napoleon's 5 Year Limited Warranty.

Choose the Riverside 42" if you want a real wood-fire look built into an outdoor wall, kitchen or pillar — a tall, deep firebox with a full log set — that you can dress up later with brick or porcelain panels, and that is rated to run on cold nights down to 0°F.

It is not right for you if you want a long, low linear flame. The Riverside is a tall, deep firebox with a full log set, rated to run on cold nights down to 0°F.

Specifications

The framed opening is 49" wide, 41-1/2" high and 19-9/16" deep; the fireplace itself is 48-7/16" wide, 40-13/16" high and 18-1/8" deep. The enclosure must be at least 72" tall from the bottom of the fireplace, with the ceiling no lower than that. Combustible framing may touch the standoffs at the sides, finishing material keeps 1" from the back, and any finish over the face within 7-5/8" above the opening and 4-1/2" beside it must be non-combustible. Combustible mantel clearance depends on how deep the mantel is — see the chart on page 23 of the installation manual. Keep furniture at least 4 feet from the front.

The Riverside 42" vs. the Riverside 36"

The Riverside 36" is the same clean-face outdoor fireplace in a narrower firebox: 50,000 BTU/hr with a 36-1/8" x 30-1/16" view in a 43" wide by 38-1/4" high framed opening, against this model's 60,000 BTU/hr and 42-3/16" x 33-1/16". Both take the same three log styles and the same panel options. The 36" is priced from $3,389; the 42" is from $3,779.

Features

  • 60,000 BTU/hr on natural gas, or on propane with Napoleon's conversion kit
  • Clean-face design with a 42-3/16" by 33-1/16" viewing area and an included finishing flange
  • Your choice of standard oak, high definition birch or high definition split oak logs
  • Optional Newport brick, Westminster herringbone brick or MIRRO-FLAME porcelain interior panels
  • Electronic ignition from the included on/off wall switch, with a high limit safety switch
  • Rated for outdoor use down to 0°F, with drainage holes across the front of the firebox

Answers to common questions

What’s included, what’s required, and what’s optional?
  • Included in the box: Electronic ignition with an on/off wall mount control switch and 20' of wire; High limit safety switch; Manual gas shut-off valve; Finishing flange and nailing tabs; Stainless Steel Interior; Napoleon 5 Year Limited Warranty.
  • Required to complete the installation, purchased separately: Log Set - one of Napoleon's three log kits (standard oak, high definition birch or high definition split oak); it ships in a separate box; Enclosure - a framed outdoor enclosure at least 72" tall, finished in non-combustible material around the opening; see pages 16 and 21 of the installation manual for the framing dimensions; Gas Line - a 1/2" natural gas line to the shut-off valve, or a propane cylinder or propane line once the fireplace is converted, run by a qualified installer; Electrical - a 120 V supply hard-wired to the fireplace.
  • Optional: Interior panels, the Prestige Heat and Exhaust Management Kit, the Woodland media kit, glass embers, the premium screen kit, the brushed stainless weather cover and the outdoor timer kit — the fireplace operates fully without any of them.
Where can the Riverside be installed?

Outdoors only — on a patio or in a yard, never indoors or inside the warm-air envelope of a house. A sheltered spot is best, because direct wind makes the flame erratic. It can sit under an overhead cover with no more than two side walls, or under a cover with three walls as long as at least 30 percent of the perimeter stays permanently open — a covered patio, a screened porch, a gazebo or an outside wall of the house all work. Keep furniture at least 4 feet from the front.

Can the Riverside run on propane as well as natural gas?

Yes. It ships for natural gas; choose Propane above and Napoleon's conversion kit for the 42" (W175-0857) is added to your order, and a qualified installer fits it. On propane it runs from a 20 lb or 30 lb cylinder (not included), which always stays outside any structure the fireplace is in, or from a hard-piped propane line. It is rated 60,000 BTU/hr on either gas, up to 4,500 ft.

Does the Riverside need a chimney or vent pipe?

No vent is required. If you want more freedom in how the enclosure is built, Napoleon's optional Prestige Heat and Exhaust Management Kit carries heat and exhaust out of the enclosure through 6" B-vent rising at least 36" — it has to be fitted during installation, so decide on it before the enclosure is built.

How do I protect the Riverside from rain and weather?

The firebox drains water through holes across its front and the fireplace is rated for use down to 0°F, but it is not waterproof: the enclosure must be finished with every joint sealed, and it should not go where water runs or pools. Napoleon recommends covering the opening between uses to keep the logs dry — the optional brushed stainless weather cover hangs over the front.

Can I put a mantel above the Riverside?

Yes. How high a combustible mantel has to sit depends on how deep it is — see the chart on page 23 of the installation manual. Napoleon recommends a non-combustible mantel. You can also send us your mantel depth. We're here to help!

Can I mount a TV above the Riverside?

Yes, with planning. A TV recess needs an enclosure at least 91" tall, and the mantel and TV spacing follow the drawings on pages 18 and 19 of the installation manual. Napoleon recommends adding the optional Prestige Heat and Exhaust Management Kit whenever a TV goes above the fireplace, and your installer checks the TV's temperature limits at installation.

Does buying from The Torch Guys affect my Napoleon warranty?

No. The stainless steel components are covered for five years; electrical parts, wearable parts such as the gas valve and logs, and the labour are covered for the first year. Coverage starts on the installation date, for a fireplace installed in the United States or Canada.

Specifications

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.