$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Expert Support

High Standards

Fast Shipping

In Stock
  • Authorized Dealer

Napoleon Ascent Multi-View See Through Direct Vent Gas Fireplace

Item #: BHD4STGN

SKU:

Price range: $5,759.00 through $6,294.00

The Napoleon Ascent Multi-View See Through is a see-through direct vent gas fireplace that shows the fire to two rooms at once: up to 30,000 BTU/hr on natural gas or propane, a choice of the glass-med...

See Full Product Description

  • Expert Support
  • Secure Checkout
  • Warranty Included
  • Reliable Delivery
Required venting: Napoleon 5" x 8" direct-vent flex venting

This fireplace is listed only for Napoleon 5" inner / 8" outer flexible direct venting (GD420 / GD430 flex kits with a GD422-1 wall terminal, ST58U-1 Silhouette terminal or GD410 / GD411 / GD412 roof terminal kit, plus firestops and Mill-Pac sealant). Do not substitute generic pipe - mixing systems voids the listing and the warranty. Maximum run lengths, elbow counts and termination clearances are in the venting section of the installation manual on this page.

Not sure which pieces you need? Call (540) 212-9374 and we'll put together your vent list from your measurements.

Optional add-ons

31 factory add-ons fit this model

Add any of these in one click — they ship together with your unit.

Remotes & Controls 4

Digital Wall Mount Thermostat
Part # W660-0081-NAP
$139.00
+ Add
Modulating Valve Regulator with Remote Control for Ascent Multi-View
Part # GD826N
$609.00
+ Add

Heat Management 1

Universal Heat Management for Napoleon Gas Fireplaces
Part # UHMF
$289.00
+ Add

Venting Components 23

External Wall Venting Package for Ascent Linear 56/76 & Ascent X 42 | 5" x 8" Direct Vent Flex Venting
Part # FTV58
$449.00
+ Add
$75.00
+ Add
Vertical Venting Package | 5" x 8" Direct Vent Flex Venting
Part # GD430+GD413
$568.00
+ Add
External Wall Venting Package for Elevation X & Altitude X | 5" x 8" Direct Vent Flex Venting
Part # GD420+GD422R-2+W010-4479
$460.00
+ Add

Accessories 2

$419.00
+ Add
Mineral Rock Kit
Part # MRKS-240
$219.00
+ Add
Call a specialist: (540) 212-9374Free fit check before you order · we confirm venting, size and parts · Mon–Fri 9–5 ET
Free shipping · ships direct from the manufacturer · typically delivered curbside in 5–17 business days. We email you the lead time for your item within one business day of ordering.
Not sure this is the right part? Ask a fireplace specialist.Call (540) 212-9374, Mon–Fri 9 AM–5 PM ET. Our hearth product specialists will confirm the model, venting and parts match before you order. Everything ships direct from the manufacturer; installation is by your own licensed local installer.
Free shipping on most orders over $99 · Authorized dealer · Manufacturer warranty included

Returns may be subject to a 20% restocking fee. Shipping and processing fees are non-refundable.

  • Free Shipping on Orders Over $99
  • Product Support Available
  • Secure Checkout
  • Trusted Payment Methods

Product Description

Napoleon Ascent Multi-View See Through Direct Vent Gas Fireplace

The Napoleon Ascent Multi-View See Through is a see-through direct vent gas fireplace that shows the fire to two rooms at once: up to 30,000 BTU/hr on natural gas or propane, a choice of the glass-media burner with Topaz glass embers included or the log burner with a PHAZER log set, 5 mm tempered glass with safety barriers, and pilot-on-demand ignition with a battery back-up — from $5,759. It vents through 5" / 8" direct vent pipe and carries Napoleon's President's Lifetime Limited Warranty.

Choose the See Through if you want one fire shared between two rooms, or a divider between living and dining spaces, dressed your way — glass embers, glass beads or mineral rocks over the glass burner, or a traditional log set. It is approved for bedrooms and bathrooms and certified for mobile homes.

It is not right for you if you want a fire for a single wall. The See Through shares one fire between two rooms.

Specifications

The See Through is 45" wide, 38-1/4" high and 25-1/8" deep, and frames 22-1/8" to 24-1/8" deep depending on where the finishing supports are set; the see-through framing drawing is on page 22 of the installation manual. The enclosure needs at least 50" of inside height and 62-1/4" from the base of the fireplace to the ceiling. The face is finished in non-combustible material that stands out no more than 4" from the door, and mantel clearances depend on the mantel's depth and are charted on page 45 of the installation manual. Horizontal vent pipe needs 3" above and 2" at the sides and bottom; the fireplace takes a 1/2" gas line and is hard-wired. On carpet or vinyl it sits on a metal or wood panel the full size of the unit.

How the See Through compares to the Peninsula

Both Ascent Multi-View models share the two burners, the media and panel choices, the 30,000 BTU/hr rating, the pilot-on-demand ignition with battery back-up and the 5" / 8" venting. The See Through shows the fire on two opposite sides and is 45" wide, from $5,759; the Peninsula shows it on three sides and is 43-1/4" wide, from $5,759.

Features

  • See-through view — the fire shows through glass on both sides, with a safety barrier on each
  • Two burners: the glass-media burner with Topaz glass embers included, or the log burner with a PHAZER log set
  • Up to 30,000 BTU/hr input on natural gas or propane
  • Pilot-on-demand electronic ignition with a battery back-up that lights it through a power outage
  • 5 mm tempered glass, approved for bedrooms and bathrooms and certified for mobile homes
  • Optional MIRRO-FLAME reflective porcelain end panels, or Newport brick end panels on the Log Set configuration

Answers to common questions

What venting does the Ascent Multi-View See Through need?

It is a direct vent fireplace on 5" exhaust / 8" air-intake pipe, run out through a wall (up to 20 ft horizontally) or up through the roof (up to 40 ft), and it can be reduced to 4" / 7" pipe with Napoleon's reducer kit. Use one brand of pipe throughout — Napoleon (Wolf Steel), Metal-Fab, BDM, Simpson Dura-Vent or Selkirk Direct Temp — and do not mix rigid and flexible pipe. A vertical termination needs at least 36" of rise, and a long horizontal run needs vertical rise first. Napoleon's wall, roof and periscope terminations cover most installs, and the outside terminal clearances are listed on page 15 of the installation manual. It can also be power vented with Napoleon's adaptor kit.

What’s included, what’s required, and what’s optional?
  • Included in the box: Burning display: Topaz crushed glass, included as standard with the Glass Ember Bed, or the PHAZER log set with glowing and charcoal embers with the Log Set; Standard firebox interior — no interior panel is needed to run it; Electronic pilot-on-demand ignition with battery back-up; 5 mm tempered glass doors with safety barrier screens; Firestop and nailing tabs.
  • Required to complete the installation, purchased separately: Venting - 5" / 8" direct vent pipe and a wall or roof termination sized for your run (see pg 10 in the installation manual); Electrical - a grounded supply, hard-wired to the fireplace's junction box; Gas Line - a 1/2" natural gas or propane line to the fireplace's shut-off valve.
  • Optional: A vertical or external wall venting package, a power vent adaptor kit, decorative MIRRO-FLAME porcelain end panels (two for a see-through) or Newport brick panels (Log Set configuration only), a remote control and the modulating valve regulator with remote — the fireplace operates fully without any of them.
Glass media or a log set — what is the difference?

They are two different burners in the same firebox. The glass-media burner spreads a single layer of glass over a media tray, and it ships with Topaz glass embers; you can swap in other glass ember or glass bead colors or Napoleon's mineral rock kit. The log burner ships with a PHAZER log set, glowing embers and charcoal embers for a traditional fire, and it is the model the Newport brick panels fit. Pick the burner under Configuration and, on the Glass Ember Bed, the color or media under Burning Display; glass media cannot be added to the log set.

Where can it be installed?

Indoors, including bedrooms, bathrooms and bed-sitting rooms, and it is certified for mobile and manufactured homes where local codes allow. It is rated to 4,500 ft, with the input reduced above that. The enclosure needs at least 50" of inside height, keep furniture and other objects at least 48" from the front, and do not run it below freezing.

What gas and electrical connections does it need?

A 1/2" natural gas or propane line to the fireplace's flex connector and shut-off valve, installed and tested before the framing is finished — natural gas at a minimum of 4.5" w.c. inlet pressure, propane at 11" to 13" w.c. Electrically it is hard-wired to a grounded junction box, and four AA batteries in the back-up pack keep it lighting through a power outage. It ships for natural gas; propane uses Napoleon's conversion kit.

Does buying from The Torch Guys instead of a local dealer affect my Napoleon warranty?

No. The combustion chamber, burner, PHAZER logs and embers, rocks and the glass (against heat breakage) are covered for as long as you own the fireplace — parts free for the first 10 years, then at half of retail; valves, switches, remotes and other electrical parts and the labour are covered for the first year. Coverage starts on the installation date.

Specifications

Video

No video is available.

FAQs

Q: Do You Ship to Me?

A: We ship throughout the continental United States with free shipping on orders over $99 (flat rate $9.99 under $99). For Alaska, Hawaii, and U.S. territories, please contact us for a custom shipping quote, which we'll provide within 1-2 business days. Orders to these locations are not processed until shipping costs are confirmed and approved. We do not currently offer international shipping outside of the United States and its territories.

Q: When Will My Order Ship?

A: Orders are processed within 1–3 business days, and delivery after shipment takes 5–14 business days depending on your location. Custom-made and made-to-order products require 2-3 weeks for production before shipment. Special order items typically take 1-2 weeks. You'll receive tracking information once your order ships. For specific timing on your order, please contact us.

Q: What Payment Methods Do You Accept?

A: We accept all major credit and debit cards (Visa, MasterCard, American Express, Discover), Apple Pay, Google Pay, and Link by Stripe for one-click checkout.

Q: Can I Cancel or Modify My Order?

A: For ready-to-ship items, contact us immediately if you need to cancel or modify. We'll do our best to accommodate if the order hasn't shipped yet. For custom-made, made-to-order, and special order items, these are final sale and cannot be canceled or modified once production begins or the order is submitted to the manufacturer. Please double-check your order details before completing your purchase.

Q: Why Choose First Response Fireplace Products?

A: We bring years of specialized expertise to the fireplace industry. When you choose us, you're getting the knowledge and experience that comes from being dedicated fireplace industry experts.

More Questions?

  • Secure Checkout
  • Trusted Payment Methods
  • Manufacturer Warranty Included
  • Expert Customer Support
  • Fast & Reliable Delivery

© 2026 First Response Fireplace Products, All rights reserved

Request a Quote

Please fill out the form below to provide us with more information. One of our experts will contact you after submission.
You can also call our experts (540) 212-9374
*Required
Checkbox*

Freight Shipping

After processing, your order will ship and should arrive within 5-7 business days, depending on your location
Your order comes with free lift gate service. The freight driver will use a lift gate to unload the shipment and place it curbside at your home. You’ll need to move the shipment from the curb to the end location. Please make sure your street can accommodate a tractor-trailer.
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD). Before signing, inspect the shipment for visible damage. If damaged, refuse the shipment and call us for a replacement. Damage to products inside the shipment must be reported within 3 business days of delivery.