Napoleon Ascent Multi-View See Through Direct Vent Gas Fireplace

It is a direct vent fireplace on 5" exhaust / 8" air-intake pipe, run out through a wall (up to 20 ft horizontally) or up through the roof (up to 40 ft), and it can be reduced to 4" / 7" pipe with Napoleon's reducer kit. Use one brand of pipe throughout — Napoleon (Wolf Steel), Metal-Fab, BDM, Simpson Dura-Vent or Selkirk Direct Temp — and do not mix rigid and flexible pipe. A vertical termination needs at least 36" of rise, and a long horizontal run needs vertical rise first. Napoleon's wall, roof and periscope terminations cover most installs, and the outside terminal clearances are listed on page 15 of the installation manual. It can also be power vented with Napoleon's adaptor kit.

• Included in the box: Burning display: Topaz crushed glass, included as standard with the Glass Ember Bed, or the PHAZER log set with glowing and charcoal embers with the Log Set; Standard firebox interior — no interior panel is needed to run it; Electronic pilot-on-demand ignition with battery back-up; 5 mm tempered glass doors with safety barrier screens; Firestop and nailing tabs.
• Required to complete the installation, purchased separately: Venting - 5" / 8" direct vent pipe and a wall or roof termination sized for your run (see pg 10 in the installation manual); Electrical - a grounded supply, hard-wired to the fireplace's junction box; Gas Line - a 1/2" natural gas or propane line to the fireplace's shut-off valve.
• Optional: A vertical or external wall venting package, a power vent adaptor kit, decorative MIRRO-FLAME porcelain end panels (two for a see-through) or Newport brick panels (Log Set configuration only), a remote control and the modulating valve regulator with remote — the fireplace operates fully without any of them.

They are two different burners in the same firebox. The glass-media burner spreads a single layer of glass over a media tray, and it ships with Topaz glass embers; you can swap in other glass ember or glass bead colors or Napoleon's mineral rock kit. The log burner ships with a PHAZER log set, glowing embers and charcoal embers for a traditional fire, and it is the model the Newport brick panels fit. Pick the burner under Configuration and, on the Glass Ember Bed, the color or media under Burning Display; glass media cannot be added to the log set.

Indoors, including bedrooms, bathrooms and bed-sitting rooms, and it is certified for mobile and manufactured homes where local codes allow. It is rated to 4,500 ft, with the input reduced above that. The enclosure needs at least 50" of inside height, keep furniture and other objects at least 48" from the front, and do not run it below freezing.

A 1/2" natural gas or propane line to the fireplace's flex connector and shut-off valve, installed and tested before the framing is finished — natural gas at a minimum of 4.5" w.c. inlet pressure, propane at 11" to 13" w.c. Electrically it is hard-wired to a grounded junction box, and four AA batteries in the back-up pack keep it lighting through a power outage. It ships for natural gas; propane uses Napoleon's conversion kit.

No. The combustion chamber, burner, PHAZER logs and embers, rocks and the glass (against heat breakage) are covered for as long as you own the fireplace — parts free for the first 10 years, then at half of retail; valves, switches, remotes and other electrical parts and the labour are covered for the first year. Coverage starts on the installation date.