Napoleon Entice 60" Wall Mount Linear Electric Fireplace
A 59-11/16" wide, 16-15/16" high electric fireplace only 5-7/16" deep that hangs on the wall, recesses partway, or builds in flush. The Napoleon Entice NEFL60CFH-1 runs full, tall flames in 10 colors over an ember bed of acrylic crystals, reflects them in a flame panel for depth, and heats at up to 5,000 BTU/hr from a standard 120 V outlet with no venting. The remote is included. from $1,539.
Choose the 60" if you want a slim electric fireplace for a 59-11/16" wall space that plugs in today and can be built into the wall later: it hangs on its bracket from a 120 V outlet, or hard-wires into a 58-7/8" x 16" opening with 0" clearance at the sides and back. It suits a living room, bedroom or kitchen wall where a gas fireplace and its venting are not an option.
It is not right for you if you want a deep, built-out firebox. The Entice is only 5-7/16" deep, so it hangs flat on the wall from a standard outlet or builds in flush with 0" clearance.
Specifications
The fireplace measures 59-11/16" wide, 16-15/16" high and 5-7/16" deep, with a 55-3/4" x 11-15/16" glass, and weighs 61.9 lb (83.1 lb packed). Recessed, it needs a 58-7/8" wide by 16" high opening in a non-load-bearing wall, at least 4" deep for a partial recess or 6" deep, including the finish, for a full recess. Clearance to combustibles is 0" at the bottom, sides and back, with 4" from the top of the trim to a ceiling or mantel; keep curtains, furniture and bedding 36" from the front. Power is 120 VAC, 60 Hz, 1,465 W, on a dedicated 15 A grounded circuit.
How the 60" compares to the other Entice sizes
The Entice comes in 36", 42", 50", 60", 72" widths, all the same 16-15/16" high, 5-7/16" deep fireplace with the same 1,465 W heater, controls and installation options; only the width, glass and opening change. The 60" is from $1,539; the 36" from $759, the 42" from $959, the 50" from $1,229, the 72" from $1,749.
Features
- Hang it on the wall, recess it partway, or build it in flush — the side and top trims and side cover panels ship in the box
- Full, tall flames in 10 colors at four brightness levels and five speeds, reflected in a flame panel for a deeper look
- Ember bed in 10 colors, plus 11 matched flame-and-ember presets including a color cycle
- Up to 5,000 BTU/hr heater with low and high settings, a built-in thermostat and a child-safety lockout — or run the flames with no heat
- Plugs into a standard 120 V outlet, no venting needed
- Remote control with a sleep timer up to 8 hours
Answers to common questions
Does it need a vent, a chimney or a gas line?
No. The Entice is electric and needs no venting, only power. Wall-mounted, it plugs into a grounded 120 V outlet on a dedicated 15 A circuit; recessed partway or fully, a qualified electrician removes the cord and hard-wires it to a 120 V, 15 A circuit. Extension cords and power strips are not allowed.
Can I recess it into the wall?
Yes. It hangs on the wall on its bracket, or recesses into a non-load-bearing 58-7/8" wide x 16" high opening framed at least 4" deep for a partial recess or 6" deep, including the finish, for a full recess. It needs 0" clearance at the bottom, sides and back, and 4" from the top of the trim to a ceiling or mantel. Recessed installs are hard-wired by an electrician.
How much heat does it put out, and can I run it without heat?
The heater makes up to about 5,000 BTU/hr (1,465 W) on a standard 120 V outlet, with low and high settings and a built-in thermostat that holds 64°F to 82°F. The flames and ember bed run with the heater off, so you can use it year-round, and the heater can be locked out from the remote.
What’s included, what’s required, and what’s optional?
-
Included in the box: Acrylic crystal media - small and medium crystals with an ember-bed strip; Remote control with a sleep timer; Side and top trims and side cover panels for a wall-mounted or partially recessed install; Wall mount bracket, bottom bracket, framing brackets and a hardware kit with cord covers; 2-year parts warranty.
-
Required to complete the installation, purchased separately: Electrical - a dedicated, grounded 120 V, 15 A circuit: an outlet within reach of the cord when wall-mounted, or a hard-wired connection by a qualified electrician when recessed; no extension cords; Framing - a non-load-bearing 58-7/8" wide x 16" high opening, at least 4" deep for a partial recess or 6" deep including finish for a full recess (recessed installs only); Finishing Material - drywall or other wall finish around and inside the opening, keeping the heater vents uncovered (recessed installs only).
-
Optional: A birch or driftwood log set, or glass embers in one of six colors - the fireplace runs on the crystals it ships with.
Can I change the flame and ember colors?
Yes. The flames and the ember bed each run in 10 colors or a color cycle, and the remote also offers 11 matched flame-and-ember presets. Flame brightness has four levels and flame speed five, and the ember bed can glow at four brightness levels or fade in and out.
Where can it be installed?
Indoors only. It is approved for bedrooms, bed-sitting rooms and mobile homes, but not for bathrooms. Keep curtains, furniture and bedding 36" from the front, keep it out of high-traffic areas, and never block the heater vents.
How does the warranty work if I buy it online?
Napoleon covers the Entice with a 2-year premium warranty: the heater and blower, motors, switches, the remote and the LED lights are replaced free for two years, labour is covered in the first year, and light bulbs and fuses are not covered. Keep your invoice and the model and serial number.
Amantii - 1" Clear Gem Fireglass (5lbs)
$139.001 × $139.00
Napoleon Wall Mount Controller for Electric Fireplaces
$112.001 × $112.00
