Ventis HEI90 EPA Wood Insert

Ventis HEI90 overview

The Ventis HEI90 (VB00024) is the smallest Ventis wood insert, designed for small masonry fireplaces that larger inserts cannot fit. Tapered top and sides make it easier to slide into a tight opening, and it needs a minimum of 19" high by 25" wide by 15-1/2" deep.

It is sized for 250 to 1,200 square feet at up to 45,000 BTU/hr, which suits a living room, cottage or smaller home. Efficiency is high at 82% optimum, emissions are 1.5 g/h, and it is Washington State approved. A 90 CFM blower with a right or left power cord is included.

Key features

• Smallest Ventis insert, with tapered top and sides
• 1.1 cu ft firebox for 17" logs
• Up to 45,000 BTU/hr; 250 to 1,200 sq ft
• 82% optimum efficiency
• 90 CFM blower with right/left power cord
• Washington State approved

Specifications

Venting & installation

Connect the HEI90 to a full-height 6" stainless steel liner insert kit, insulated where the manual requires; see the venting recommendation on this page. It should be installed per the manufacturer's installation manual and local codes by a qualified installer.

What to order with it

A faceplate is required. Add a 6" liner kit sized to your chimney and the liner insulation wrap.

FAQ

Is it big enough to heat my house?
It is rated for 250 to 1,200 sq ft, so it suits smaller homes or a main living area.

Which side does the blower cord come out?
The 90 CFM blower can be wired with a right or left power cord.

Questions about fit or venting? Call (540) 212-9374.