Ventis HE350 EPA Zero-Clearance Wood Fireplace

Ventis HE350 overview

The Ventis HE350 (VB00005) is a large EPA 2020-certified zero-clearance wood fireplace from Stove Builder International. It is a heater first: rated at up to 95,000 BTU/hr on seasoned cordwood and 850 to 2,800 square feet, with a 4.3 cubic foot firebox that takes 25-inch logs. For a cold-climate home or a big open floor plan, it can carry much of the heating load.

It burns cleanly for its size at 1.6 g/h, non-catalytic, so there is no combustor to replace. The fire viewing area is 403 square inches. As a zero-clearance unit, it frames into a new wall or chase and vents through 8" solid-pack chimney, and you finish it with the faceplate and refractory brick kit you choose.

Key features

• EPA 2020 certified, non-catalytic, 1.6 g/h
• Up to 95,000 BTU/hr; 850 to 2,800 sq ft
• 4.3 cu ft firebox; logs up to 25"
• 403 sq in fire viewing area
• 69.7% optimum efficiency
• Zero-clearance installation on 8" solid-pack chimney

Specifications

Venting & installation

The HE350 is approved on 8" 1" solid-pack UL 103 HT chimney (Ventis or DuraVent DuraTech), starting at an 8" anchor plate, with a minimum 15 ft from the fireplace base to the cap and a ventilated roof flashing. See the venting recommendation on this page and use one brand end to end. It should be installed per the manufacturer's installation manual and local codes by a qualified installer.

What to order with it

Two choices are required: a faceplate and a refractory brick kit. Add 8" DuraVent DuraTech chimney components, and look at the optional Ventis accessories group.

FAQ

Can it heat a whole house?
In many homes up to about 2,800 sq ft it can be a primary heat source, depending on layout, insulation and climate.

Is a blower included?
Check the optional Ventis accessories group on this page for blower options.

Questions about fit or venting? Call (540) 212-9374.