Ventis HE350 overview
The Ventis HE350 (VB00005) is a large EPA 2020-certified zero-clearance wood fireplace from Stove Builder International. It is a heater first: rated at up to 95,000 BTU/hr on seasoned cordwood and 850 to 2,800 square feet, with a 4.3 cubic foot firebox that takes 25-inch logs. For a cold-climate home or a big open floor plan, it can carry much of the heating load.
It burns cleanly for its size at 1.6 g/h, non-catalytic, so there is no combustor to replace. The fire viewing area is 403 square inches. As a zero-clearance unit, it frames into a new wall or chase and vents through 8" solid-pack chimney, and you finish it with the faceplate and refractory brick kit you choose.
Key features
- EPA 2020 certified, non-catalytic, 1.6 g/h
- Up to 95,000 BTU/hr; 850 to 2,800 sq ft
- 4.3 cu ft firebox; logs up to 25"
- 403 sq in fire viewing area
- 69.7% optimum efficiency
- Zero-clearance installation on 8" solid-pack chimney
Specifications
| Manufacturer code | VB00005 |
|---|
| Firebox | 4.3 cu ft |
|---|
| Heating area | 850 – 2,800 sq ft |
|---|
| Max output (seasoned cordwood) | 95,000 BTU/hr |
|---|
| Optimum efficiency | 69.7% |
|---|
| Emissions | 1.6 g/h |
|---|
| Max log length | 25" |
|---|
| Flue | 8" |
|---|
| Shipping weight | 555 lb |
|---|
Venting & installation
The HE350 is approved on 8" 1" solid-pack UL 103 HT chimney (Ventis or DuraVent DuraTech), starting at an 8" anchor plate, with a minimum 15 ft from the fireplace base to the cap and a ventilated roof flashing. See the venting recommendation on this page and use one brand end to end. It should be installed per the manufacturer's installation manual and local codes by a qualified installer.
What to order with it
Two choices are required: a faceplate and a refractory brick kit. Add 8" DuraVent DuraTech chimney components, and look at the optional Ventis accessories group.
FAQ
Can it heat a whole house?
In many homes up to about 2,800 sq ft it can be a primary heat source, depending on layout, insulation and climate.
Is a blower included?
Check the optional Ventis accessories group on this page for blower options.
Questions about fit or venting? Call (540) 212-9374.
Fire Pebbles | 25lbs 
Osburn 6"Ø x 25' Insulated Flex Pipe for Forced Air Kit | AC01350
$225.001 × $225.00
